Long-term permits for mobile cranes in NRW - heavy transport card for the 36 t mobile crane

The digital heavy transport map shows all structures in the construction load of the state road construction company NRW and the Autobahn GmbH, which may not be passed from a static point of view. The map serves only as an overview for the planning and execution of the transports. It does not replace the application for permission / approval! According to NRW decree 58.97.02.04-000002 of January 19, 2021, a permanent permit for certain mobile cranes with 3 axles and a total weight of 36 t can be issued for federal trunk and state roads in NRW without hearing the state road construction company NRW. The prerequisite for this is obtaining the current digital heavy transport map from the State Office for Road Construction in North Rhine-Westphalia. Immediately before the start of the journey, the driver must call up the corresponding up-to-date digital heavy transport map and check the intended route with regard to existing structures with driving bans. This includes only the following cranes: three-axle truck-mounted cranes with an axle spacing of at least 1.65 m and a distance between the first and third axle of at least 4.40 m for driving on federal trunk roads. The provision of the underlying raw data is currently being checked. If you are interested in using the raw data in the future, you can contact the e-mail address given in the "Contact us" field. Important note: For the current license regulations, please note the information on the conditions of use and the data protection notices given on the external map view.