-
Suitability map Heat-cold storage fresh/brackish: 2nd and 3rd aquifer
On the one hand, the map contains the technical potential for heat and cold storage (depending on the thickness of the aquifer and the permeability) divided into different usage... -
Fresh-salt groundwater occurrences
The base file used originates from a study that TNO has carried out on behalf of the province into the possibilities for cold-heat storage in the province. (TNO report 'Regional... -
Suitability map Heat-cold storage fresh/brackish: 1st aquifer
On the one hand, the map contains the technical potential for heat and cold storage (depending on the thickness of the aquifer and the permeability) divided into different usage... -
Dewatering depth current climate
The drainage depth map with the Average Highest Groundwater Level (GHG) calculated by the National Water Model has been refined with the height map at 0.25 m2 (AHN3). The maps... -
Average lowest groundwater levels - 2050 - High (Climate Effect Atlas)
This map is an excerpt from the map low Average Lowest Groundwater Level 2050 scenario "High" from the Climate Effect Atlas. -
Soil disposal 2050
The soil storage map shows how many millimeters of water can be stored in the soil (water storage). The map was commissioned by the province of South Holland on the basis of the... -
Blue Agenda Average seepage in mm per day over 2012 - 2019
This file contains the calculated average seepage in mm/day over the period 2012 to 2019 -
Groundwater levels in peat areas
The Province of Utrecht has drawn up a Soil Vision to limit soil subsidence. The groundwater stages are used here. The Water Boards also use the groundwater stage map for... -
Blue Agenda Average groundwater level (MEAN) compared to NAP over 2012 - 2019
This file contains the calculated average groundwater level over model year 2012 up to and including 2019 compared to NAP. -
Bottom thickness coating
The file is a soil grid file in which the thickness (in metres) of the top layer relative to ground level is shown up to the depth of the first aquifer. -
Environmental Protection Area, designated 1997 (history)
Designated environmental protection areas from the PMP and POP, map 12. (The Drentsche Aa groundwater protection area is included in a separate map layer, see also Drentsche Aa... -
Blue Agenda Wet Damage Agriculture WH Climate Scenario
This file contains the difference in calculated wet damage for agriculture per building block. The difference is calculated between a building block and the reference situation.... -
Soil thickness first aquifer
The file is a soil grid file in which the thickness (in metres) of the first aquifer is shown. -
Environmental protection area, designated 2000 (history)
Old text: Designated environmental protection areas from the PMP (Provincial Environmental Policy Plan) and POP, map 12. (The Drentsche Aa groundwater protection area is... -
Blue Agenda Potential for wet nature
Potential for wet nature. Low rewetting means that the GVG must be increased to 50 cm or the drought stress must be limited to 9 days. A lot of wetting means that the GVG must... -
Blue Agenda Average seepage in mm per day WH Climate Scenario
This file contains the calculated average seepage in mm/day over model year 2012 up to and including 2019, including the effects of the KNMI WH scenario up to 2050. -
Groundwater quality 2010 (history)
Map layer shows the quality of the groundwater in % exceedance of standards in the deep (25 m - mv) and shallow groundwater (10 - 25 m - mv) for the parameters: NITRATE,... -
Blue Agenda Mean groundwater level (MEAN) compared to NAP WH Climate Scenario
This file contains the calculated average groundwater level relative to NAP for the WH Climate Scenario. -
Soil quality 2010 (history)
Map layer shows the quality of the soil and phreatic groundwater in percentages of standard exceedance for the parameters: NITRATE, PHOSPHATE, ZINC, NICKEL, CADMIUM, ALUMINUM... -
Blue Agenda Calculated GLG for model year 2012 to 2019 in meters compared to ...
This file contains the calculated average lowest groundwater level over the model year 2012 through 2019, m-mv per building block for the year 2050.
