Covid-19 setting of possible infection of persons with a positive test result for SARS-CoV-2 per safety region and publication date

For English, see below From July 6, 2022, the GGD will ask a modified set of questions to people with a positive test result for SARS-CoV-2. Among other things, the setting of possible contamination will then no longer be requested. As a result, this data will no longer be updated from that moment on. This file contains the following numbers: - (number of newly reported) positively tested persons - (number of newly reported) positively tested persons for which possible setting(s) of infection have been reported - (number of newly reported) positively tested persons by possible setting of infection by safety region, as of the date on which the reports were published by RIVM. The numbers concern COVID-19 reports from December 14, 2020. From this date, data is available about the capacity of the GGDs to conduct source and contact investigations. Numbers are only shown when the coverage and completeness of source and contact tracing is high, because the numbers are then most complete. The file is structured as follows: - A record per possible setting of contamination for each security region of the Netherlands per date for which the number of reports was above zero. This file is updated every day but only data from fully completed iso weeks is displayed. On Wednesday, a new week is added to the file in its entirety. Description of the variables: Version: version number of the dataset. When the content of the dataset is structurally changed (so not the daily update or a correction at record level), the version number will be adjusted (+1) and also the corresponding metadata in RIVM data (https://data.rivm.nl ). Version 2 update (10 June 2021): - The cases with setting “hospice” have been retroactively assigned to the setting “nursing home or residential care center for the elderly” from 10 June 2021. - From 10 June 2021, for persons who have tested positive and who may have been infected in a place where they are an employee, both the workplace and the setting “work situation” will be added automatically. By way of illustration: For primary school teachers with a possible source of contamination in the work situation, the setting “school and childcare” could previously be specified and / or the setting “work situation”. Now both settings are automatically recorded. If someone's workplace does not appear in the list of settings, only the overarching setting category “work situation” is included. The frequency of the overarching setting “work situation” will therefore probably be higher from June 10, 2021 than before. Version 3 update (November 17, 2021): - Until November 17, the variables [Total_reported], [Reports_with_settings], [Setting_reported] and [Number_settings_reported] were only shown when [Source_and_contact_tracing_phase] was “high”. From [Date_of_report] November 17, 2021, for [Date_of_publication] from November 8, 2021, these variables are additionally shown when [Source_and_contact_tracing_phase] is “medium”. Version 4 update (February 8, 2022) - From February 8, 2022, the positive SARS-CoV-2 test results will be reported directly from CoronIT to RIVM. The test results of other test providers (such as Testing for Access) and healthcare institutions (such as hospitals, nursing homes and general practitioners) that enter their positive SARS-CoV-2 test results via the Reporting Portal of GGD GHOR are also reported directly to RIVM. Reports that are part of the source and contact investigation sample and positive SARS-CoV-2 test results from healthcare institutions that are reported to the GGD via healthcare email are reported to RIVM via HPZone. From 8 February, the date of the positive test result is used and no longer the date of notification to the GGD. Version 5 update (March 24, 2022): - In version 5 of this dataset, records are compiled according to the municipality reclassification of March 24, 2022. See description of the variable Security_region_code for more information. Date_of_report: Date and time on which the data file was created by RIVM. Date_of_publication: Date on which the reports were published by RIVM. Security_region_code: Security region based on the place of residence of the positively tested person. If the place of residence is not known, the Security Region is based on the GGD that submitted the report, except for the Central and West Brabant Security Region and Brabant-Noord, since the GGD and Security Region are not comparable for these regions. See also: https://www.cbs.nl/nl-nl/figures/detail/84721ENG?q=Veiliteiten From March 24, 2022, this file has been compiled according to the municipality classification of March 24, 2022. The municipality of Weesp has been merged into the municipality of Amsterdam . With this division, the Gooi- en Vechtstreek safety region has become smaller and the Amsterdam-Amstelland safety region larger; GGD Amsterdam has become larger and GGD Gooi- en Vechtstreek has become smaller (https://www.cbs.nl/nl-nl/our-services/methods/classifications/other/municipal-classifications-per-year/classification-per-year/municipal-classification-on-1-januari-2022 ). Source_and_contact_tracing_phase: The degree of coverage and completeness of source and contact tracing (hereinafter referred to as BCO phase) per safety region per isoweek (Monday to Sunday): high (high), limited (medium) or low (low). The BCO phase is reported as the lowest BCO phase of the week per safety region. RIVM receives the BCO phase per GGD per week. This information is then linked to COVID-19 reports based on the GGD where the positively tested person lives. Most safety regions correspond to the work area of ​​a GGD, except for the Central and West Brabant Safety Region (working area in GGD West Brabant and GGD Hart voor Brabant). If the BCO phase differs in a week between these two GGDs, then the lowest BCO phase of the two GGDs in this file for this security region is reported. If the BCO phase for certain GGDs has not been delivered to RIVM, “missing” is entered. The BCO phases are described as follows: High Regular source and contact investigations (BCO) are carried out in this region, with or without monitoring. The registration and analysis of infection settings is complete. Medium Risk-based BCO is performed in this region due to the high numbers of people who tested positive. The registration and analysis of infection settings is not complete. Low Due to the particularly high numbers of people who tested positive, the pressure on BCO in this region is very high. The positive result is always passed on to the person who is infected. BCO takes place to a limited extent. The registration and analysis of infection settings is not complete. As a result, this information cannot be displayed at an aggregated level. Total_reported: The number of new people reported to the GGDs with a positive test result for SARS-CoV-2 that was published by RIVM on [Date_of_publication]. Numbers are shown when [Source_and_contact_tracing_phase] is “high” and from [Date_of_publication] November 8, 2021 also when [Source_and_contact_tracing_phase] is “medium”. Suppressed numbers are replaced by the number “-9999”. The actual number of infected persons is higher than the number of reports in surveillance because not everyone with possible infection is tested. Please note: the numbers in this column cannot simply be added up, because they are repeated on a single day for all types of settings reported within a security region. If no settings are specified within a security region on a day, no record will be included in this file for this security region for this day. For the totals per safety region, use the file “COVID-19_aantallen_gemeente_per_dag”. Reports_with_settings: The number of new persons reported to the GGDs with a positive test result for SARS-CoV-2 published on [Date_of_publication] by RIVM for which possible setting(s) of infection and related cases have been reported. Numbers are shown when [Source_and_contact_tracing_phase] is “high” and from [Date_of_publication] November 8, 2021 also when [Source_and_contact_tracing_phase] is “medium”. Suppressed numbers are replaced by the number “-9999”. The actual number of people who tested positive with related cases is higher than the number of reports in surveillance. In addition, the GGD is not aware of the relationship with another infection or the setting of infection for every positively tested person. Please note: the numbers in this column cannot simply be added up, because they are repeated on a single day for all types of settings reported within a security region. Setting_reported: Reported possible setting of infection of persons reported to the GGDs with a positive test result for SARS-CoV-2 with related cases. The reported settings in this dataset have been translated and coded according to the following scheme: - Home situation (housemates including non-cohabiting partner) - home - Visit in the home situation (of or with family, friends, etc.) - visit - Work situation - work - School and childcare - school_daycare - 1st line health care / general practitioner - general_practitioner - 2nd line health care / hospital - hospital - Other health care - health_care_other - Nursing home or residential care center for the elderly - nursing_home - Residential facility for people with a disability - residential_care_disabled - Other residential facility - residential_care_other - Day care for elderly and people with a disability - daycare_elderly_disabled - Party (party, birthday, drinks, wedding, etc.) - gathering - Fellow traveler / trip / vacation - travel - Flight - flight - Catering - hospitality - Student association/activities - student_activity - Leisure activities, such as sports club - leisure - Religious meetings - religious_activity - Choir - choir - Funeral - funeral - Other - other Settings are shown when [Source_and_contact_tracing_phase] is “high” and from [Date_of_publication] 8 November 2021 also when [Source_and_contact_tracing_phase] is “medium”. Suppressed data is replaced with the string “-9999”. Number_settings_reported: The number of new persons reported to the GGDs with a positive test result for SARS-CoV-2 published on [Date_of_publication] by RIVM for which the setting of possible infection is stated as [Settings_reported]. Numbers are shown when [Source_and_contact_tracing_phase] is “high” and from [Date_of_publication] November 8, 2021 also when [Source_and_contact_tracing_phase] is “medium”. Suppressed numbers are replaced by the number “-9999”. For each positive COVID-19 report, each type of setting is binary (true/false), but multiple types of settings can be registered per report. Therefore, this column cannot be added to the number of reports. For example, in a positive person who has two possible settings of contamination, both are stated (“true”). In addition, a setting is a category and not a specific location. Reports with the same setting can relate to the same location, but this is not necessary. The number of reported settings cannot be interpreted as the number of locations where infections took place. Within security regions there may be several locations of the same setting of possible contamination. The actual number of people who tested positive with related cases is higher than the number of reports in surveillance. In addition, the relationship or setting of infection is not known to both the GGD and the positively tested person for every actually related positively tested person. -------------------------------------------------- --------------------------------------------- Covid-19 possible setting of transmission for persons with a positive test result for SARS-CoV-2 , per security region and publication date From July 6, 2022, the PHS will ask a modified set of questions to people with a positive test result for SARS-CoV-2. Among other things, the possible setting of transmission will then no longer be requested. As a result, this data will no longer be updated from that moment on. This file contains the following numbers: - Number of newly reported positively tested persons - Number of newly reported positively tested persons for whom possible setting(s) of transmission have been reported -Number of newly reported positively tested persons by possible setting of infection by security region, as of the date on which the reports were published by the RIVM. The numbers concern COVID-19 reports from December 14, 2020. From this date, data is available about the capacity of the PHSs to conduct source and contact tracing. Numbers are only shown when the coverage and completeness of source and contact tracing is high, because the numbers are then most complete. The file is structured as follows: - A record per possible setting of contamination for each security region of the Netherlands per date for which the number of reports was above zero. This file is updated every day but only data from fully completed iso weeks is displayed. On Wednesday, a new week is added to the file in its entirety. Description of the variables: Version: version number of the dataset. When the content of the dataset is structurally changed (so not the daily update or a correction at record level), the version number will be adjusted (+1) and also the corresponding metadata in RIVM data (https://data.rivm. NL). Version 2 update (June 10, 2021): - The cases with the “hospice” setting have been retroactively assigned to the “nursing home or residential care center for the elderly” from 10 June 2021. - From 10 June 2021, for persons who have tested positive and who may have been infected in a place where they are an employee, both the workplace and the setting “work situation” will be added automatically. By way of illustration: For primary school teachers with a possible source of contamination in the work situation, the setting “school and childcare” could previously be specified and / or the setting “work situation”. Now both settings are automatically recorded. If someone's workplace does not appear in the list of settings, only the overarching setting category “work situation” is included. The frequency of the overarching setting “work situation” will therefore probably be higher from June 10, 2021 than before. Version 3 update (November 17, 2021): - Until November 17, the variables [Total_reported], [Reports_with_settings], [Setting_reported] and [Number_settings_reported] were only shown when [Source_and_contact_tracing_phase] was “high”. From [Date_of_report] November 17, 2021, for [Date_of_publication] from November 8, 2021, these variables are additionally shown when [Source_and_contact_tracing_phase] is “medium”. Version 4 update (February 8, 2022) - From 8 February 2022, positive SARS-CoV-2 test results will be reported directly from CoronIT to the RIVM. The test results of other test providers (such as Testing for Access) and healthcare institutions (such as hospitals, nursing homes and general practitioners) that enter their positive SARS-CoV-2 test results via the Meldportaal of GGD GHOR are also reported directly to the RIVM. Reports that are part of the source and contact investigation sample and positive SARS-CoV-2 test results from healthcare institutions that are reported to the PHS via healthcare email are reported to the RIVM via HPZone. From 8 February, the date of the positive test result is used and no longer the date of notification to the PHS. Version 5 update (March 24, 2022): - In version 5 of this dataset, records are compiled according to the municipality reclassification of March 24, 2022. See description of the variable Security_region_code for more information. Date_of_report: Date and time on which the data file was created by the RIVM. Date_of_publication: Date on which the reports were published by the RIVM. Security_region_code: Security region based on the place of residence of the positively tested person. If the place of residence is not known, the Security Region is based on the PHS that submitted the report, except for the Midden- and West Brabant Security Region and Brabant-Noord, since the PHS and Security Region are not comparable for these regions. Also see: https://www.cbs.nl/nl-nl/cijfers/detail/84721NED?q=Veiligheid From March 24, 2022, this file has been compiled according to the municipality classification of March 24, 2022. The municipality of Weesp has been merged into the municipality of Amsterdam. With this merger, the Gooi- en Vechtstreek security region has become smaller and the Amsterdam-Amstelland security region larger; GGD Amsterdam has become larger and GGD Gooi- en Vechtstreek has become smaller (https://www.cbs.nl/nl-nl/onze-diensten/methoden/classificaties/overig/gemeentelijke-indelingen-per-jaar/indeling-per-jaar/gemeentelijke-indeling-op-1-januari-2022). Source_and_contact_tracing_phase: The degree of coverage and completeness of source and contact tracing (hereinafter referred to as BCO (bron and contactonderzoek) phase) per security region per isoweek (Monday to Sunday): high (high), limited (medium) or low (low). The BCO phase is reported as the lowest BCO phase of the week per security region. The RIVM receives the BCO phase per GGD per week. This information is then linked to COVID-19 reports based on the GGD where the positively tested person lives. Most security regions correspond to the work area of a GGD, except for the Midden- and West-Brabant Security Region (working area in GGD West Brabant and GGD Hart voor Brabant). If the BCO phase differs in a week between these two GGDs, then the lowest BCO phase of the two GGDs in this file for this security region is reported. If the BCO phase for certain GGDs has not been delivered to the RIVM, “missing” is entered. The BCO phases are described as follows: High Regular source and contact tracing (BCO) is carried out in this region, with or without monitoring. The registration and analysis of transmission settings is complete. Medium Risk-based BCO is performed in this region due to the high numbers of people who tested positive. The registration and analysis of transmission settings is not complete. Low Due to the particularly high numbers of people who tested positive, the pressure on BCO in this region is very high. The positive result is always passed on to the person who is infected. BCO takes place to a limited extent. The registration and analysis of transmission settings is not complete. As a result, this information cannot be displayed at an aggregated level. Total_reported: The number of new people reported to the PHSs with a positive test result for SARS-CoV-2 that was published by the RIVM on [Date_of_publication]. Numbers are shown when [Source_and_contact_tracing_phase] is “high” and from [Date_of_publication] November 8, 2021 also when [Source_and_contact_tracing_phase] is “medium”. Suppressed numbers are replaced by the number “-9999”. The actual number of infected persons is higher than the number of reports in surveillance because not everyone with possible infection is tested. Please note: the numbers in this column cannot simply be added up, because they are repeated on a single day for all types of settings reported within a security region. If no settings are specified within a security region on a day, no record will be included in this file for this security region for this day. For the totals per security region, use the file “COVID-19_aantallen_gemeente_per_dag”. Reports_with_settings: The number of new persons reported to the PHSs with a positive test result for SARS-CoV-2 published on [Date_of_publication] by the RIVM for whom possible setting(s) of transmission and related cases have been reported. Numbers are shown when [Source_and_contact_tracing_phase] is “high” and from [Date_of_publication] November 8, 2021 also when [Source_and_contact_tracing_phase] is “medium”. Suppressed numbers are replaced by the number “-9999”. The actual number of people who tested positive with related cases is higher than the number of reports in surveillance. In addition, the GGD is not aware of the relationship with another infection or the setting of infection for every positively tested person. Please note: the numbers in this column cannot simply be added up, because they are repeated on a single day for all types of settings reported within a security region. Setting_reported: Reported possible setting of transmission for persons reported to the GGDs with a positive test result for SARS-CoV-2 with related cases. The reported settings have been translated and coded in this dataset according to the following scheme: - Home situation (housemates including non-cohabiting partner) - home - Visit in the home situation (from or with family, friends, etc.) - visit - Work situation - work - School and Daycare - school_daycare - 1st line health care / general practitioner - general_practitioner - 2nd line health care / hospital - hospital - Other health care - health_care_other - Nursing home or residential care center for the elderly - nursing_home - Residential facility for people with disabilities - residential_care_disabled - Other residential facility - residential_care_other - Day care for the elderly and people with disabilities - daycare_elderly_disabled - Party (party, birthday, drink, wedding, etc.) - gathering - Fellow traveler / trip / vacation - travel - Flight - flight - Horeca - hospitality - Student association/activities - student_activity - Leisure activities, such as sports club - leisure - Religious gatherings - religious_activity - Choir - choir - Funeral - funeral - Other - other Settings are shown when [Source_and_contact_tracing_phase] is “high” and from [Date_of_publication] November 8, 2021 also when [Source_and_contact_tracing_phase] is “medium”. Suppressed data is replaced with the string “-9999”. Number_settings_reported: The number of new persons reported to the PHSs with a positive test result for SARS-CoV-2 published on [Date_of_publication] by the RIVM for which the setting of possible infection is stated as [Settings_reported]. Numbers are shown when [Source_and_contact_tracing_phase] is “high” and from [Date_of_publication] November 8, 2021 also when [Source_and_contact_tracing_phase] is “medium”. Suppressed numbers are replaced by the number “-9999”. For each positive COVID-19 report, each type of setting is binary (true/false), but multiple types of settings can be registered per report. Therefore, this column cannot be added to the number of reports. For example, in a positive person who has two possible settings of infection, both are stated (“true”). In addition, a setting is a category and not a specific location. Reports with the same setting can relate to the same location, but this is not necessary. The number of reported settings cannot be interpreted as the number of locations where infections took place. Within security regions there may be several locations of the same setting of possible transmission. The actual number of people who tested positive with related cases is higher than the number of reports in surveillance. In addition, the relationship or setting of infection is not known to both the GGD and the positively tested person for every actually related positively tested person.